E-mail:sales@panamich.com Tel:086 021 34551793

Resistive Touch Systems

The Panamich Solutions MicroTouch resistive touchscreens are based on proven five-wire resistive technology, the preferred solution for applications that demand reliability, input flexibility, and contamination resistance. The MicroTouch five-wire resistive touchscreens use a glass panel with a uniform resistive coating. A thick polyester coversheet is tightly suspended over the top of the glass, separated by small, transparent insulating dots. The screens work with standard EETI controller/chip solutions and drivers under a wide variety of operating systems, and are available in a set of standard products as well as customized designs.

Smooth Integrations

MicroTouch Zero-Bezel touchscreens are available with proprietary touch technology to deliver a touch response that is drift-free  and accurate in high-use applications. The zero-bezel design eliminates the need for a traditional front-bezel, achieving a smooth, seamless flat surface for a clean, modern look. MicroTouch zero-bezel resistive touchscreens use a flexible printed circuit cable that virtually eliminates the cable attachment bump that is typical on most resistive touchscreens and enables a smooth, flat integration.

Quality is built in

Panamich is MicroTouch delivers both X and Y measurements made on a stable rear glass layer where many other resistive touchscreen designs use a flexing plastic coversheet to measure only one axis. As a result, MicroTouch resistive touchscreens provide a longer product life, designed to withstand more than 35 million touches.

High industry standards

MicroTouch touchscreens can be sealed against contamination to support NEMA 4/4x/12 and IP65 standards. Every screen meets pencil hardness 4H per ASTM D3363.

Product Overview

The Panamich is  MicroTouch touchscreens are based on proven five-wire resistive technology, the preferred solution for applications that demand reliability, input flexibility, and contamination resistance. MicroTouch touchscreens are available in bezel and zero-bezel designs, with proprietary Panamich technology to deliver a touch response that is drift-free and accurate in high-use applications. Panamich is MicroTouch delivers both X and Y measurements made on a stable rear glass layer where many other resistive touchscreen designs use a flexing plastic coversheet to measure only one axis. As a result, MicroTouch resistive touchscreens provide a longer product life, designed to withstand more than 35 million touches. MicroTouch touchscreens can be sealed against contamination to support NEMA 4/4x/12 and IP65 standards.

The zero-bezel design eliminates the need for a traditional front-bezel, achieving a smooth, seamless flat surface for a clean, modern look. MicroTouch zero-bezel touchscreens use a flexible printed circuit cable that virtually eliminates the cable attachment bump that is typical on most resistive touchscreens and enables a smooth, flat integration. The screens work with standard EETI controller/chip solutions and drivers under a wide variety of operating systems, and are available in a set of standard products as well as customized designs.

Applications
Point-of-sale (POS) terminals
Voting machines
Industrial automation
Medical equipment
Office automation
Retail automation
Pharmacy automation
Mechanical
Input MethodFinger or gloved hand (cloth, leather, or rubber) activation, or soft stylus
Size Range7″ to 22″
Electrical
Positional AccuracyStandard deviation error is less than 0.080 (2mm)
ResolutionTouch point density is based on controller resolution of 4096 x 4096
Touch Activation ForceTypically less than 4 ounces (113 grams)
ControllerBoard: Serial (RS232) and USB Chip: Serial (RS232) and USB
Optical 
Light TransmissionHL products: 80% ± 5% at 550nm wavelength
Environmental
Temperature/Relative HumidityMicroTouch: -20 to 60°C, 90% RH (non-condensing) MicroTouch Zero-Bezel: Oto 50°C, 90% RH (non-condensing)
AltitudeOperating: 10,000 ft (3,048m) Storage/transport: 50,000 ft ( 15,240m)
Chemical ResistanceIndustrial chemicals: acetone, methylene chloride, methyl ethyl ketone, isopropyl alcohol, hexane, turpentine, mineral spirits, unleaded gasoline, diesel fuel, motor oil, transmission fluid, antifreeze. Food-service chemicals: vinegar, coffee, tea, grease, cooking oil, salt, plus most commercial cleaners including ammonia-based glass cleaner and laundry detergent.
SealabilityCan be sealed to meet NEMA 4 and 12 and IP 65 standards
Durability
Surface DurabilityAccuTouch Zero-Bezel: meets pencil hardness 4H per ASTM D3363
Expected LifeOperationally tested to 35 million touches in one location without failure
Warranty
MicroTouch: 3-year limited warrantyMicroTouch: 3-year limited warranty
Benefits
Zero-bezel configuration for seamless design to eliminate the traditional bezel that can collect dust and dirt
4H pencil hardness resists scratching
Flat cable attachments for seamless integration and customization capabilities
No lamination of additional décor foil is required which helps to reduce costs and supply chain complexity
Stable, drift-free operation
Broad input flexibility
Contamination resistance
Accuracy in high-use applications
Can be sealed to support NEMA 4/4x/12 and IP65 standards upon integration

Including the following, can be supported by touch controllers:

Windows Vista / Windows 7 / 8/ 10
Windows Embedded Standard 7 / 8
Windows XP / 2000
Windows NT/ 98 / Me
Windows Embedded Compact 7 / 2013
DOS
Linux (different distributions)
QNX 6.3.2 / 6.4.1 / 6.5

Ordering Information

7.0 inche-12.0 inche

If the size you want is not listed in the table, you can contact us and we can customize it according to your project requirements.

DiagonalFormatSensor Part No.Controller Part No.Engineering drawings.
7.0W incheTBDDownload
8.4 incheTBDDownload
9.0W incheTBDDownload
10.1W incheTBDDownload
10.4 incheTBDDownload
11.0W incheTBDDownload
12.1 incheTBDDownload
12.48W incheTBDDownload
13.0 inche-22.0 inche

If the size you want is not listed in the table, you can contact us and we can customize it according to your project requirements.

DiagonalFormatSensor Part No.Controller Part No.Engineering drawings.
13.0W incheTBDDownload
14.0W incheTBDDownload
15.0W incheTBDDownload
15.6 incheTBDDownload
17.3W incheTBDDownload
17.54 incheTBDDownload
18.6W incheTBDDownload
19.0 incheTBDDownload
19.34W incheTBDDownload
20.1 incheTBDDownload
21.3 incheTBDDownload
21.5W incheTBDDownload
22.0W incheTBDDownload